Kreg Jigs®

Kreg Jigs®

Kreg Joinery™ helps do-it-yourselfers and woodworkers of all skill levels build projects faster, stronger, and better than ever before. We have all of the pocket-hole jigs, machines, and hardware you need to complete high-quality projects in no time.

How Kreg Joints™ Work

Kreg Joinery™ is an incredibly fast, strong, and simple way of joining wood. It essentially involves drilling a hole at an angle into one workpiece, and then joining it to a second workpiece with self-tapping screws. While it may seem simple, the technique is revolutionary because when you’re done assembling, there’s no need to leave your joint clamped up for hours, glue is completely optional, and – since you’re only machining one workpiece – there are no frustrating alignment problems to deal with. Kreg Joints™ are so simple they can be built in just a few easy steps!

The first step is to drill pocket-holes in your first workpiece. A pocket-hole is created with a specialized drill bit that features a stepped pilot tip. The step of the bit creates the flat-bottom ‘pocket,’ which seats the screw, while the tip creates the guide-hole for the screw to follow as it’s driven into the second workpiece. The flat step created by the bit ensures that the screw head seats firmly in the bottom of the hole, resulting in an incredibly strong and tight joint.

Each Kreg Jig® features lifetime-guaranteed hardened-steel drill guides that guide your bit at a precise angle as you drill the pocket hole. The angle of the pocket hole is optimized for strength and flexibility across a wide range of material thicknesses, and ensures that your screw always exits at the center of the workpiece.
 

To drill the pocket hole, simply place the workpiece in the Kreg Jig®, clamp it down using the built-in toggle clamp, adjust your depth, and drill the hole! For panel joints, put one hole about every 6-8 inches. For rail/stile joints, put two holes evenly across the joint, depending on the width of the workpiece. The Kreg Jig® features three uniquely spaced holes so you can find just the right spacing for your workpiece.

With the pocket hole drilled, the second step is to connect your workpieces together with specialized Kreg self-tapping screws. Clamping the joint ahead of time ensures that it will stay in place as you drive the screws. Again, there is no need to drill a pilot hole into the second workpiece at all. Simply clamp the two pieces together using either the Kreg Face Clamp™ or Right Angle Clamp, and drive the screws to secure the joint. No complicated alignment and no waiting for the glue to dry!

Kreg Screws include many features which make them
uniquely suited for use with Kreg Joints™:

That’s it — you’re done! In just a minute or so, you’ve created an incredibly strong joint that requires minimal (if any) sanding and doesn’t need to be clamped while waiting for the glue to dry! Once you’ve tightened the screw, you’re ready to move on to the next joint or even start finishing! Visit your local Kreg dealer today to see for yourself just how fast, strong, and simple this technique really is.

Endless Possibilities

Angles and corners, decks and stairs, legs and rails, and more! With Kreg Joinery™, the application possibilities are endless! See below a variety of popular applications.

Applications

Kreg Joinery™ is perfect for a wide variety of applications. From face-frames to panel joints, from edgebanding to complex curves, Kreg Joinery™ can do it all. Whatever your next project, the Kreg Jig® can help you build it faster, easier, stronger, and with more confidence than ever before!

Endless Possibilities

Angles and corners, decks and stairs, legs and rails, and more! With Kreg Joinery™, the application possibilities are endless! See below a variety of popular applications.

TV Offer

The Kreg Jig® simplifies woodworking, making your projects fun to build! It has been counted on by professionals for years to help create beautiful and strong wood joints with no glue, no complicated math, and no need for an army of expensive saws, sanders, and clamps.

If you are here because you saw the Kreg Jig® infomercial on TV and would like to purchase the offer that includes project plans, please place that order through www.KregJoint.com

Which Kreg Jig® is right for me?

Check out the chart below to find the Kreg Jig® that best fits your building needs. 

Kreg Jig® K5

The Fast, Easy
Solution for Building
with Wood

Kreg Jig® K4

The Do-It-Yourself
Solution for Building
with Wood

Kreg Jig® R3

The Home-Improver's
Solution for Building
with Wood

Kreg Jig® HD

The Heavy-Duty
Solution for Building
with Wood

Hardened Steel
Drill Guides
YES YES YES YES
Durable Reinforced
Nylon Body
YES YES YES YES
Works with Multiple
Material Thicknesses
YES
1/2" to 1-1/2"
YES
1/2" to 1-1/2"
YES
1/2" to 1-1/2"
YES
1-1/2" and Thicker
Use as a Portable Tool YES YES YES YES
Use as a Benchtop Tool YES YES
Clamp Recess
YES
with K4 or K5
Accepts Multiple Drill Guides YES
Standar, Micro, HD
YES
Standard, Micro, HD
Built-in Clamp YES YES
Front-Side Clamping YES
Tool-Free Auto Adjust
Dust Collection YES
Built-in Rotating Dust Port

*

Supports Long/Wide Stock YES,
Built-In Extension Wings with Storag

+

Built-In Storage YES
Extension Wings Hold Bits, Screws & More
M.S.R.P. $139.99 $99.99 $44.99 $59.99

* Bonus Item
+ Sold Separately