Kreg Tool

Find my screw

Tell us about your project and we'll tell you which screw will work best.

Where will your project be? Tool Tip

Yes
No

What material are you using? Tool Tip

What units do you use? Tool Tip

Inches
Millimeter

Are your pieces the same thickness? Tool Tip

Yes
No

Wood pieces of the same thickness
Wood pieces of a different thickness

Thinner Material Thickness Tool Tip

Thinner Material Thickness Tool Tip

Thicker Material Thickness Tool Tip

Thicker Material Thickness Tool Tip

Kreg Pocket-Hole Jig Settings

Legacy Kreg Jig® Settings Tool Tip

Our Recommendation

Tool Tip
Pocket-Hole Screws

Tool Tip
Pocket-Hole Screws

Tool Tip
Pocket-Hole Screws

Products you might also like

Oops! We’re having trouble finding the right screw for you.

Depending on your project's specific combination of material type and thickness, you might need a little extra help in choosing the right screw. Please get in touch with Kreg Technical Support at 1-800-447-8638 (Monday – Friday, 8 a.m. - 5 p.m. CST) or at technicalsupport@kregtool.com.

Find in Store

Look for Kreg® Pocket-Hole Screws in the same aisle as all your other favorite Kreg products, usually in your favorite retailer's tool section.

Outdoor projects need screws made from durable material that can stand up to the elements – especially moisture.

If you’re not sure yet, or you might use the project both indoors and outdoors, select Outdoor for best results.

This tells us what kind of thread your screws need: fine or coarse.

Select Hardwood if you’re building with ash, cherry, maple, oak, or walnut.

Select Softwood/Plywood if you’re building with cedar, fir, pine, poplar, spruce, MDF, or plywood of any kind.

Still unsure? Please contact Kreg Technical Support at 1-800-447-8638
(Monday – Friday, 8 a.m. - 5 p.m. CST).

Select the unit you use most often.

We'll give you the right size screw in your preferred measurement system: inches or millimeters.

Make sure to double-check this one!

If you’re building with two different material thicknesses, we’ll calculate the best screw length for maximum strength – while ensuring the screw isn’t too long and won’t poke through your material.

Still unsure? Please contact Kreg Technical Support at 1-800-447-8638
(Monday – Friday, 8 a.m. - 5 p.m. CST).

This is the piece you’ll be drilling a pocket hole into.

Choose the actual thickness of your material – not the nominal size.

Still unsure? Please contact Kreg Technical Support at 1-800-447-8638
(Monday – Friday, 8 a.m. - 5 p.m. CST).

This is the piece you’ll be connecting to Piece A with a pocket-hole screw.

Choose the actual thickness of your material – not the nominal size.

Still unsure? Please contact Kreg Technical Support at 1-800-447-8638
(Monday – Friday, 8 a.m. - 5 p.m. CST).

This setting is for use with the following legacy Kreg Jigs:

K4, K4H, K4L, K4MS, K5, K5MS, K4-INT, K4MS-INT, K5-EUR, K5MS-EUR