Overall rating: 4.6252675 / 5 from 467 reviews.

AI Generated Review Summary

The Kreg Jig® Mini offers a simple, compact design suitable for various material thicknesses and widths. Customers appreciate its hardened-steel drill guide, lifetime warranty, and wood-chip relief hole for easy drilling. The glass-reinforced nylon body and plug-seating guide contribute to its effectiveness. Positive reviews highlight its strong joints, professional results, and ease of use for small projects.

Summary topics

• Starting Kit (5%): It was noted by customers that this kit is a great way to get started at a very modest price.
• Instruction Clarity (5%): Customers keep praising the clear and easy-to-follow instructions provided by the company.
• Jig Usability (19%): Many customers remarked that the jig is great, easy to use, and comes with a clamp spot.
• Joint Strength (6%): It was highlighted by customers that the Kreg jig is very strong and provides tight and secure joints.
• Product Price (4%): Customers loved the great price of the product, which was mentioned multiple times in the reviews.

Review topics: ["instructions","size","fit","problem","frame","material","quality","works","look","design","value","set","results","screws","deal","price","convenience","depth","use","jig","tool","holes","clamp","joints","kit","projects","wood","drill bit","version","kreg"].

Review highlights

• "This is a high quality, inexpensive and simple tool that allows you to make strong butt joints. I..." — Jeff
• "This is a high quality, inexpensive and simple tool that allows you to make strong butt joints." — Jeff
• "An inexpensive and versatile tool used to easily drill pocket holes in a wide variety of accessib..." — Emm

Reviews

Q&A

Can you tell me what the length is please? I'm not sure if I would have enough room to use it on what i have in mind, thanks.

That is 4" long

Hi, what screw size/type should I use with 15mm hard wood? I'm thinking #7 or #8 partially threaded button cap about 25mm long?

You will want to be using the 1" fine threaded screw.

What is the width of the Mini jig? I'm looking to fit it in the trough of a 3/4" dado.

The width of the Mini Jig is 1" wide and unfortunately would not work with your application.

Is it possible to remove the grey colored material thickness stop on the bottom of the 320 to allow it to lie flat on the wood and use it similar to the Mini? Is there a way to determine where to position the 320 relative to the end of the wood by measuring manually, just as is done with the Mini?

Yes, you can pop off the bottom portion of the 320 to use it flat.

Would you be able to print or etch the jig pisitioning, depth collar positioning, and screw recommendations on the jig? Thank you

You could do that.

Is the same size drill bit used with the "mini" as with the larger jigs?

Yes, the bit is a 3/8".

? Drill Angle ?

That angle of the pocket holes are 15 degrees.

What is the recommended spacing of the jig for 1" stock?

When using the Mini with 1" stock, you will set the Jig for the 3/4" settings and use the 1-1/2" screw.

What is the tear-drop recess on the bottom side of the Kreg Jig® Mini for?

Inserting Kreg plugs into your pocket holes is easy when you use the tear-drop recess on the bottom side of your Kreg Jig® Mini. To use, simply place a plug into the tear-drop recess on the underside of the jig. Then, press on the jig to firmly seat the plug into your pocket hole.

Can I use the Kreg Jig® Mini without a clamp?

The Kreg Jig® Mini should not be used without a clamp. If the jig shifts during the drilling process, it can break the tip and damage your workpiece pocket holes. Find the right Kreg Clamp here.