Adaptive Cutting System Master Kit

Average Review (5):

Take your project-building skills to the next level

  • Plunge Saw and 62" Guide Track provide straight, smooth cuts. Project Table expands cutting capability
  • Versatile: Cut plywood and boards—rip, crosscut, mitered cuts—with one system
  • Precise: Make accurate, high-quality cuts with ease and repeatability
  • Safe: Work confidently with integrated safety features and anti-kickback protection
  • Portable: Set up and stow your system quickly for simple transport and storage
  • Learn more about the Adaptive Cutting System


Ships Free!

ITEM#: ACS3000

Add to Cart


Combines the Adaptive Cutting System Plunge Saw, 62" Guide Track, Project Table – Top, and Project Table – Base

When you’re building wood projects, you need a cutting system that can adapt to your needs, whether you’re crosscutting boards to length, ripping them to width, cutting mitered angles, or even cutting plywood sheets and large panels down to size. The Adaptive Cutting System makes it all possible, and more, by combining the advantages guided cutting with the unparalleled versatility of a Project Table that supports and positions materials precisely.

Start your Adaptive Cutting System with the Kreg Plunge Saw and 62" Guide Track. The track guides the saw precisely on your cutline and protects against splintering to ensure that you get straight, smooth cuts. The Plunge Saw features a fully-shrouded blade, plus safety features like a retractable riving knife and anti-kickback protection that allow the powerful, variable-speed motor to cut safely while your hands stay well away from the blade. Parallel Guides and Rip Guides allow you to lock in repeatable measurements when using the track, so you can take precision cutting anywhere.

  • Watch Video

    Cutting on the Project Table

  • Watch Video

    Cutting off the Project Table

Build your Adaptive Cutting System by adding the Project Table to create a portable cutting system that adapts to your needs. Mounting the Guide Track to the Table allows you to crosscut and rip solid wood boards, cut mitered angles, bevel edges, plus support and precisely cut plywood and large panels to size. The Project table includes multiple guides, stops, and integrated measuring systems that position your materials securely and precisely, so you get accurate, smooth, and straight cuts every time. The Project Table folds to store vertically, and easily rolls out and sets up quickly for use, then stows away compactly. You can also enhance your system with available accessories, such as another Guide Track and Track Connectors to double your cutting capacity.

Whether you’re cutting solid wood or plywood, wherever you’re working — from the garage to the driveway to the workshop — and whatever you’re creating, you can take your project-building skills to the next level with the versatile, precise, safe, and portable system that adapts to your needs: the Adaptive Cutting System.

To view additional product specifications, click here

Have questions? Visit our FAQ page.


Plunge Saw Specifications

Blade Diameter




Max Cutting Capacities

90°: 2⅛" 

45°: 1½"

Bevel Capacity

-1° to 47°

No-Load Speed

2000-5500 RPM

AMPS (120V)


Saw Dimensions

12" L x 9" W x 10½" H 


11.7 lbs.

62" Guide Track Specifications

Track Width


Track Material


Track Length


Maximum Cut Length

50" (off Project Table)

48" (on Project Table)


4.75 lbs. 

Table Top Specifications

Maximum Cut

48" (along table length)

25" (across table width)

48" (with included extension)

Table Top Material

MDF, Aluminum

Table Top Size

55" L x 29½" W x 2¼" H

Table Top Weight

44 lbs.

Primary / Secondary Rules Measuring Scales

1 ⁄16" increments

Bench Dog Hole Size



Hole Spacing

96mm center to center

Table Base Specifications

Table Base Material


Table Base Weight

28 lbs.


8"-diameter, heavy-duty

Height Adjustment Range

33.75" - 36.4625"

System Specifications


(1)  Adaptive Cutting System Plunge Saw
(1)  Adaptive Cutting System 62" Guide Track
(1)  Adaptive Cutting System Project Table – Top with included guides, stops, and measuring scales
(1)  Adaptive Cutting System Project Table – Base


Proposition 65

Plunge Saw Manual

North American Manual

Project Table Manual

North American Manual

Reviews for "Adaptive Cutting System Master Kit"

Average Review:

Great Product

I am a one armed DIY enthusiast and have difficulty holding material safely for cutting and measuring. The Master system gave me a great boost in confidence and accuracy. I set the measurement and cut ;great accuracy and save a lot of time with repetitive cuts. Although it is meant to be used with the right hand, I have been able to use with my left hand only and still be safe and get great cuts. It is very easy to store and setup saving a ton of space in my shop/garage.


By William Spratt

May 2, 2019


Fantastic Product from Kreg, with everything I need for my small shop (I have no Table Saw); allowing me to make a wide variety of precise cuts. The Table and Saw are impressive. Had one small issue making the initial cut. I could not get the track to rest against the versa stops. With the Hinge Support Bracket on the front side of the Hinge Mounting Plate, the Plate would not slide forward enough to let the track's Edge touch the versa stops. My solution was to place the Hinge Support Bracket on the back side. Not sure if that's correct, but after I did, I was able to complete the set up. Perhaps Kreg can address that issue. This System is great for my needs, and saved me big money that I wasn't willing to spend on other tables. I will get a lot of use and a quick return on this investment. Thanks again Kreg


By Doug Bornyk

April 30, 2019

Awesome tool

I purchased my Kreg adaptive cutting system for use in my public school woodshop. We assembled the system today and it is rock solid. All of the parts were included and the components were delivered damage free . I own and use a Festool TS 75 . It is used for breaking down sheet goods . I was in the market for an Mft table but the cost was well out of my reach . Kreg tools came out with their system so I decided to take a chance on it. We use Kreg tools daily in the shop and all of the tools work as described . The ACS is well made and rock solid. The saw follows the track and the saw blade plunges into the work. No exposed blades to worry about so students can be exposed to real world woodworking activities with the danger of a typical circular saw pressed against a clamped straight edge . The saw is solid and has a soft start variable speed motor . There is an anti kick back feature that keeps the saw from moving backwards Incase it binds . There is a riving knife on the saw that engages when the saw is plunged . The bench dogs that come with the system are anodized aluminum . I may order another set to have around the shop . The quality of the dogs is impeccable . The ACS is well engineered . It folds and rolls away for easy storage when not in use. I want to thank the Kreg tool company for brings an affordable track saw system to the mark. I look forward to many more well engineered and crafted tools .


By Joseph Calvarino

April 9, 2019

Initial thoughts on the ACS3000

I have a basement shop with a table saw, bandsaw, miter saw, router table and CNC, and can do pretty much everything needed, however getting and cutting sheet goods into a basement shop is difficult. I’ll be starting a big project (New kitchen cabinets for our house) soon and decided to give the ACS3000 a shot. It will reside in the garage even after the big project. I just got it this weekend and still learning, I thought I would share some early thoughts (if you’re like me, it was hard to find comments and reviews from real world users on such a new system). The system is really well built and very sturdy. It’s been incrediably accurate and the repeatability of cuts has been great. Setup was pretty straight forward, but follow the instructions, and it will save you some back tracking. I also purchased the Kreg work horse which coupled with the ACS3000 makes cutting down sheet goods a breeze. My only two negatives thus far are the initial alignment with the bench dogs was a bit tricky as I couldn’t get the track to touch both stops. I eventually got it figured out but clearer instructions and suggestions on this step would be helpful. The other is the dust bag which in my opinion is a nice thought but pretty useless. However dust control works great when hooked up to a shop vac. Having the ability to make 3 solid contact points for the stock works great to help keep things square and secure. So far this has been a great addition to my shop and tools. I’ll share future thoughts and comments as I spend more time with jt.


By Bill Barry

April 7, 2019

Projects just got easier!

The ACS is a great way to cut material accurately and repeatedly for any project. I get material tear out off of the blade with my table saw, but the ACS produces ready to join edges right off of the blade. Setting repeatable cut lengths and angles with the Versa Stops is also a great luxury. They provide a solid edge to slide your material up to and allow for quick and easy set up! I recommend this system for anyone who doesn't have the means for a table saw and or miter saw and wants to build projects with accuracy and dependable results.


By Casey Reeves

March 12, 2019

Read more reviews