Average Review (6):

Coming Soon

Straight, accurate, splinter-free cuts made easy

  • Rip, cross cut, and make angled cuts up to 48" long in plywood, MDF, and panels
  • Simply align the Guide Track with your marks to make accurate cuts
  • Hold track in place without clamps thanks to anti-slip guide strips
  • Prevent splintering with anti-chip strips that support material during the cut
  • Begin cuts easily with a Starting Block that the supports saw and allows normal blade guard operation
  • Mount almost any circular saw—left or right blade—to the Universal Sled
  • Universal Sled is compatible with the Kreg Rip-Cut™
  • Take your saw to the material instead of having to take your material to the saw


ITEM#: KMA2700

Item is not yet available.
Find a dealer near you.


Transform your circular saw into a high-performance, track-guided cutting system

Start projects right by making straight, accurate, splinter-free cuts with your circular saw and the Accu-Cut™ Circular Saw Guide Track System. It rips, crosscuts and makes angled cuts up to 48" long in plywood, MDF, and other large panels with super simple setup, precise accuracy, and amazing control.

The Accu-Cut guides your circular saw along an aluminum track that keeps the saw moving in a straight line easily. The Accu-Cut™ design makes it simple to set up by just aligning the track with your cut line. No clamps are required to hold the track in place thanks to dual guide strips. They feature an anti-slip coating to prevent slipping, and an anti-chip feature to prevent splintered cuts. Plus, the track makes it easy to make straight cuts on sheets that don't have a straight, flat edge.

Circular saws don’t have effective guides that keep them moving straight along a cut line. Plus, it can be difficult to see the blade’s cutting path. Together, these things make it challenging to keep a saw on your desired cut. Circular saws also often cause splintering of face veneers. The Accu-Cut™ solves these problems. The Accu-Cut™ is portable, too, so you can take your saw to the workpiece and cut with precision, rather than having to handle heavy sheets on a table saw. 

The Accu-Cut™ is easy and intuitive for a novice to use, but robust enough for professionals. Because it eliminates the need to keep the saw straight and manually guide the saw along a cut line, the Accu-Cut™ is ideal for less-experienced users. Accu-Cut™ also makes professionals faster and more productive because it makes a variety of cuts quickly and easily in the shop and on the job site.


Guide Track

Aircraft-quality aluminum with dual anti-chip, anti-slip guide strips 

Saw Sled

Accepts left- and right-blade saws
Built-in indexing stop and precision cursor

Cut Length

Maximum 48" (1220mm)


(1) Universal Saw Sled, (2) 26.5" Aluminum Guide Tracks, (2) Track Connectors, (1) Starting Block, (1) Track Indicator Clip, detailed setup and usage instructions

Manual North American Manual

Reviews for "Accu-Cut™"

Average Review:

Dee Warren

Looks like another 5 star product. If not already in the works, being able to cut a full 8' length would be beneficial. Never being able to justify the cost of a Festool plunge, I will be buying the Accu-Cut.


By Dee Warren

June 12, 2017


Looks great but please make this expandable to 8 feet


By Ben Vanden Berg

June 8, 2017


I'm so disappointed that it's only 48 inches long. 50 or 55in (like track saw) would be much better. Melamine sheet are 49in wide and this is the kind of material that suffers the most of chipping. I'm also very skeptical about the joint in the middle. Not sure there's no play there. I tried this kind of splitted guide in the past and it didn't worth it. Kreg, please review your copy. Thanks.


By Yves Nadeau

June 8, 2017


Another great looking product from Kreg and a much more economical option to the Festool or Dewalt tracksaw kits. The kit appears to come with two track sections and lists a maximum cut of 48". Would like to see that additional track sections could be added to make a full 96" cut length available for sheet goods.


By Jason Leighton

June 8, 2017

blew it!

Right idea but missed the mark. Why would you not make this capable of cutting an 8 ft sheet of plywood.Thats the hardest cut on a table saw. You blew it!. Like I complained about the lack of toolbox when I initially bought the jig.


By r brad

June 8, 2017

Read more reviews