Overall rating: 4.4814816 / 5 from 54 reviews.

AI Generated Review Summary

Summary topics

Review topics: ["fit","quality","problem","works","connection","track","tool","saw","cuts","system","sheet goods"].

Review highlights

Reviews

I bought these tracks as

"I bought these tracks as a replacement for the ones that came with my adaptive cutting system. I've lost the original set screws and have been managing with off the shelf screws. Nothing works quite as well as the originals though."

— Richard C. (5/5)

It’s great for cutting slabs

"It’s great for cutting slabs greater than 6’ in length"

— George K. (5/5)

When purchasing the additional track,

"When purchasing the additional track, you shouldn’t have to spend extra money to get the connection brackets"

— Curtis R. (4/5)

Good connectors. Only negative is

"Good connectors. Only negative is they should come with at least one extra set screw."

— Charles M. (5/5)

Worked just as it should

"Worked just as it should"

— Kenneth A. (5/5)

Worked perfectly as it was

"Worked perfectly as it was meant to be. Able to put two pieces of track together for one long piece and cut full sheets of plywood longwise. Great product."

— Don L. (5/5)

Only used once at this

"Only used once at this point but all parts fit and work perfectly"

— Mark K. (5/5)

As advertised. Good quality.

"As advertised. Good quality."

— Tony H. (5/5)

Track worked well. I purchased

"Track worked well. I purchased it to extend the track that came with the saw. It connected well and was straight. If extending the track I would suggest to get a new splinter guard for your old track and cutting both at the same time."

— Larry H. (4/5)

Easily use to connect 2

"Easily use to connect 2 tracks. Allows cutting 8ft sheet goods"

— Christopher P. (5/5)

Q&A

I need the small screws that hold down the metal bars for the straight edge guide.: We have a hardware pack for the connectors. they are at this link. https://www.kregtool.com/support/faqs-product-info/replacement-parts/connector-bar-hardware-pack/105134.html
Does the ACS and the additional track include these bars?: No, these will need to be purchased separate.
Will the track connectors for the adaptive cutting system work for the accu-cut tracks? I am having a difficult time finding new track connectors for the accu-cut. Please advise, thank you.: No, the ACS Connectors will not work with the Accu-Cut. You will want to purchase the 102000.
Do the fixing screws Come with the connectors as it says in the description? Why do some buyers complain that there are no screws: Yes, they come with the set screws
What size are the set screws?: The threads are 10-24 x 9/32".
How can I obtain set screws for the ACS extension bars. The package of ACS bars l purchased from a distributor only had the bars and nothing else.: For replacement parts, please contact our Tech Team at 800-447-8638 M-F 8-5 CST or by email at technicalsupport@kregtool.com.
You can sell the tracks, and tell people they can join them together, but you can't provide the connectors?: We sell those connectors. You can find them at the following link. https://www.kregtool.com/shop/cutting/adaptive-cutting-systems/adaptive-cutting-system-guide-track-connectors/ACS445.html
Can I connect 62″ Guide Tracks together for longer cuts?: Yes, you can attach a second 62″ Guide Track to make cuts up to 112″-long when using the Guide Tracks and Plunge Saw off the Project Table. You cannot use two 62″ Guide Tracks on the Project Table. Guide Tracks are connected using Guide Track Connectors, which are sold in pairs. https://www.kregtool.com/shop/cutting/adaptive-cutting-systems/adaptive-cutting-system-62-guide-track/ACS430.html https://www.kregtool.com/shop/cutting/adaptive-cutting-systems/adaptive-cutting-system-guide-track-connectors/ACS445.html
Where can I learn more about the Adaptive Cutting System?: You can learn more about the Adaptive Cutting System on our dedicated education page: https://learn.kregtool.com/learn/conquer-cuts-adaptive-cutting-system/
The whole track system sells for $79. That includes connector bars. If I lose the connector bars I have to pay $40 for replacements? That seems abusive and can't be correct. Am I missing the $5 set of bars some where else on the site?: These Connector Bars are not for the Accu-Cut. They are for the 62" ACS Tracks. If you have any problems with the connectors on your Accu-Cut, you can email us at technicalsupport@kregtool.com.