Overall rating: 4.77561 / 5 from 205 reviews.

AI Generated Review Summary

The Cabinet Door Mounting Jig is praised for its ease of use and high quality, helping customers attach hinges and position doors accurately. It is highly recommended for its effectiveness and ease of use, making it a valuable tool for cabinet door installation.

Summary topics

Ease of Use (18%): A significant number of customers raved about the tool, praising its quality and ease of use.
Effectiveness (16%): A significant number of customers remarked that the jig is great, easy to use, and highly recommended.
Product Quality (7%): It was highlighted by customers that the product has great quality and is very good quality as advertised.

Review topics: [instructions, installation, material, works, quality, shipping, design, use, customer service, results, jig, tool, doors, help, connection, addition, haven’t, hand, cabinets, level, projects, kreg, idea, chance].

Review highlights

"Kreg jigs are incredible quality." — Stephen A.
"The jig is solidly made with no flex when I used it." — James N.
"This tool is the third hand you always wish you had when hanging doors." — Ed G.

Reviews

I work alone most of

"I work alone most of the time and this jig is a game changer for installing cabinet doors. I set or overlay it makes the job so much easier. Kreg has done it again."

— Cameron B. (5/5)

Makes hanging doors easy

"I bought this along with some of the other tools to make cabinets in my garage. Each one made the different steps of the process so much easier than trying to do them by hand. This mount makes it easier to mount doors by yourself and to get it right the first time. I have a lot of kreg tools and I am sure will continue to buy from them in the future."

— Rob (5/5)

A third hand is always

"A third hand is always welcome."

— Rafael M. (5/5)

Haven’t used it yet but

"Haven’t used it yet but it seems like it make figuring out the door hinges a lot easier."

— David S. (5/5)

As promised the Kreg Cabinet

"As promised the Kreg Cabinet door Jig allowed me to have perfect placement on all my doors with minimal learning. I am a DIYer with no experience and did a complete kitchen remodel. So this tool was priceless to the success of a pro looking kitchen."

— John K. (5/5)

Really helpful.

"So much easier to install cabinet doors with this jig. Fast shipping."

— Jerry R. (5/5)

Worked really well, just what

"Worked really well, just what I needed to hang a lot of cabinet doors"

— Stuart B. (5/5)

Easy to use and set

"Easy to use and set up. It gives you the extra hand you need when hanging cabinet doors."

— james p. (4/5)

I haven’t had a chance

"I haven’t had a chance to use it yet. I got it because I’m going to be starting a big project in a while. The project is going to be pretty big. The price seemed to be good and I knew I would be needing it. I’m going to build a workbench in my garage. It’s going to be modular and have spots for my table saw, miter saw, drill press, air filtration and cabinets along with shelving and lighting and power outlets for all of my equipment."

— Randy M. (5/5)

Set up was easy and

"Set up was easy and was intuitive. Great for setting door reveals fast a real "NO BRAINER""

— Fred T. (5/5)

Q&A

When using the "inset" setting on the jig to help install an inset frameless door, what is the resulting reveal between the bottom of the door and the cabinet box?: That will depend on what settings you use.
Can this door mounting jig be used to mount non-hidden hinges (old style hinges) that mount on the outside of the face frame?: Yes, you sure can use that for those hinges.
Do I have a defect in my Cabinet Door Mounting Jig? I noticed my jig is not a true 90 degrees. Hence, even though it held the doors up, almost every cabinet door had to be moved up and down a bit to align with each other. I put a square against it, and you can see the unit is not square. It is not a lot off, but enough I could tell it did not clamp perfectly square against the cabinet frames. Looing at it visibility my son and I could tell it was not square.: To get a replacement, please contact our Tech Team at 800-447-8638 M-F 8-5 CST or by email at technicalsupport@kregtool.com
If the cabinet bottom is flush mounted to a cabinet top, can the Kreg jig be used?: Yes, you can use this on that application.
I’m installing inset doors with a 1/8” reveal between the door and face frame. Will this jig accommodate that?: No, the settings go from inset to 1/4" overlay.
Would this jig also work for the INSET type hinges?: Yes, this will work with inset doors and up to 2" overlay.
Can this jig be used for butt hinges?: This can be used with any type of hinges to mount the door to the cabinet.
Is the support arm supposed to sit at 90 degrees to the cabinet frame? (i.e. square) Mine doesn't and so the cabinet door tilts on an angle away from the frame, it doesn't matter how hard I clamo it the jig won't come into square: That should be holding that door flat. I have emailed you directly to help you out.
Can this be used in a bottom cabinet that has no way to clamp from underneath?: This Jig will need to be clamped down. If there are no way to clamp it, it will not be able to be used
Can this be used for installing inset doors?: Yes, These can be used with inset doors.