Right Angle Clamp

Average Review (6):

  • Watch Video
    Watch Video
  • Right Angle Clamp
    Image Gallery
  • Holds pocket-hole joints at 90° during project assembly
  • Automaxx® technology adjusts automatically to material thickness
  • Contoured grips for added comfort
  • Pin fits securely into pocket hole
  • Swivel pad holds mating piece
  • 5" (127mm) reach



Add to Cart


The Right Angle Clamp makes projects with 90° joints faster and easier than ever by giving you the helping hand you need to hold the parts in position as you drive in the screws. Just slip the pin on the Right Angle Clamp into a pocket hole, close the clamp, and it draws the mating pieces tightly together. The swiveling clamp pad opposite the pin grabs the mating piece securely. 

Thanks to Automaxx® Auto-Adjust Technology, the Right Angle Clamp adjusts to match the material automatically with a simple squeeze of the handles. This handy clamp works with all kinds of materials, from thin 1/2" plywood to thick 2x4 boards. 

Clamp Using the Pocket Hole
The steel pin on this clamp is shaped to fit snugly into a pocket hole, securely anchoring one workpiece against the other for easy assembly. Just drive a screw into an adjacent pocket hole while the Right Angle Clamp holds the piece steady for you.

Swivel Pad for Solid Clamping
The arm opposite the pin features a pad that swivels to fit tight against your material, so you can count on solid clamping without a chance of the joint shifting.

Ultra-Wide Reach
Whether you’re joining two thin drawer sides for a cabinet, or thicker materials to frame an outdoor project, the Right Angle Clamp opens wide to get the job done.

Use One Clamp, or Use Two
Many woodworkers find it handy to use two Right Angle Clamps when assembling large workpieces. Place a clamp on each end to hold the wood while you drive screws in the remaining pocket holes.

California Residents: Prop 65 Information


Clamping Capacity

Materials up to 31/8" (79 mm)


5" (127 mm)

Adjustment Knob

Provides easy-to-regulate clamping pressure


Ergonomic padded grips prevent hand fatigue 

Clamp Body

Highly durable, all-metal construction

Compatible With

Design reaches into pocket holes on the inside or outside of 90° case assemblies

Reviews for "Right Angle Clamp"

Average Review:

Works exactly as it should

Does what it's supposed to do, very well. When will Kreg make a version that works with the Micro Jig??? That's a pretty big omission, Kreg! The pin on this one only fits the regular sized pocket holes. It's too big to use with the holes made by the Micro jig (which are 25% smaller).


By Michael Goran

March 6, 2017

1/2 hole too small

I was doing a project joining 2 pieces of 1/2 inch plywood. The hole is a bit too small for the clamp to effectively hold the pieces.


By Bob Szerszynski

December 21, 2016

Right angle clamp

I like the two that I have, but would like to have a clamp that would work on the mini jig.


By Marvin Wright

August 24, 2016

KHCRA Right Angle Clamp.

I bought two of these clamps through Amazon quite recently. They are all right, I suppose, but the quality is not KREG. I expected them to be stamped "Made in USA" not "Made in China"



August 22, 2016

Right Angle Clamp

Have used this on a number of projects and found it more than useful. I also would like to see a right angle clamp for the mini size pocket hole developed as in some of the projects it would have been more than useful


By Wlad Kocz

July 27, 2016

Read more reviews