Picture says it all
"# DO M.......for $24.99 you expect the whole set up.....I got what is in the picture X1 drill, X1 collar, X1 hex key, I'm sure you the pocket hole jig you got for 24.99 is top of the line....in some third world country."
Overall rating: 4.0 / 5 from 6 reviews.
AI Generated Review Summary
Summary topics
Review topics: ["drill bit"].
Review highlights
Reviews
Careful! “Heavy Duty” means too large for the standard Kreg...
"Careful! “Heavy Duty” means too large for the standard Kreg jigs. This item is 1/2” diameter. All the standard Kreg hardware is sized for 3/8” drills (which Home Depot does not carry)."
great product
"I use it on a lot. it's a time saver. only had one bad bit that broke. a new bit i touch it to the wood it fell on the ground. pick it up and saw it had a air bubble in the steel. should have retruned it but work got busy. i've had this kreg set for about 12 years. that's the only bad thing that's happened."
I use this bit all the time. When I build something, I build it to last several lifetimes. Tradi...
"I use this bit all the time. When I build something, I build it to last several lifetimes. Traditional framing using a nail gun to toenail studs sometimes splinters the ends weakening the studs. The pocket holes leaves the stud intact. It takes longer but the results are superior. highly recommended."
Good Product
"I got this (and the jig) when they first came out because of the ability to work with 2x lumber. The first bit I got broke after the first few holes. Called Kreg customer service and they shipped a new out right away and that one has been going ever since. I've probably drilled 150 holes or so with it and it still cuts well. BTW, you can buy either the bit or the bit and jig as a kit and although the drill bits get dull after a while, I've never worn out a jig yet and I've drilled a lot of holes with this and it's smaller cousins. Not sure how this got confused as being the kit as the other fellow indicated. Anyway, if you have an application for drilling pocket holes in 2x lumber, this is it."
Not as advertized
"Picture is deceptive. You only get the drill bit, collar and allen wrench. You DO NOT get the jig, screws or plugs. I returned it and got what I wanted elsewhere."
Q&A
- Do you offer Drill-Bit Sharpening?
- After careful consideration, Kreg has discontinued sharpening drill bits. We appreciate and value our relationship and regret any inconvenience this decision may cause. Replacement drill bits can be purchased at www.kregtool.com or through your favorite retailer. For more information, call us at 800-447-8638 (Monday-Friday, 8am-5pm CST) or email us at technicalsupport@kregtool.com.
- What size drill bit to use with k5 set
- The drill bit in the K5 is 3/8" in diameter.
Kreg Jig® HD Drill Bit
Availability:
- Discontinued
Discontinued
- Highlights
- For use with the Kreg Pocket-Hole Jig HD manual pocket-hole jig
- Drills 1/2" (12mm) diameter pocket holes
- One-piece, hardened-steel design
Show More