Overall rating: 5.0 / 5 from 4 reviews.

AI Generated Review Summary

Summary topics

Review topics: ["clamp","device"].

Review highlights

Reviews

Really useful addition to my work bench

"The bench clamp has really come in handle to serve as a second set of hands when I need to hold things in place am I am the only one in the shop. You have to have the ability to recess the clamp plate into your workbench in order for this to work well, but once it is in place it is super helpful and easy to remove if you need a flat surface to work on. The self adjusting clamp is extremely useful."

— Ray M. (5/5)

Very well thought out. 👍

"Very well thought out. 👍"

— Tim P. (5/5)

Handy

"This is a great little device for holding your work in place."

— Paul S. (5/5)

Dog hole work bench

"This is an amazing and very functional, movable, and versatile work bench! I love it and it is working very well for me!"

— Curtis H. (5/5)

Q&A

Where is the best location to install my Kreg KBK-IP Bench Klamp Insert Plate on my 6ft x 3ft work bench? Should I center it?: The placement will depend on where it is comfortable for you and where it will work best for your projects.
How do I adjust my Automaxx® Clamps?: Kreg® Clamps with Automaxx® make clamping faster and easier than ever by adjusting automatically to clamp materials that are thick, thin, or in between. With Automaxx, there's no fussing with knobs that adjust the clamp capacity, no fiddling to get the exact pressure you want, no need for thickness adjustment at all - just powerful, predictable clamping every time. Below are some helpful hints to ensure your clamping experience is consistent every time. Remove the clamp from the packaging and test the clamp pressure on your material. If you are happy with the pressure of the clamp, no further adjustment is needed. If you would like more/less clamping pressure, simply open the clamp handles fully. Once open, turn set screw one-half turn (to the positive for more pressure, to the negative for less pressure) to adjust. Try out the clamp on the same material and repeat these steps until the desired pressure is found. Once you are happy with the clamping pressure, the clamp will maintain this same pressure until you change the setting again. If you would like to increase or decrease clamping pressure, follow the previous steps until the appropriate pressure is met. To ensure consistent pressure, open the clamp handles completely each time you move the clamp. This allows the Kreg Automaxx system to reset for the correct clamping pressure. Following these steps will ensure that these clamps will perform their best for all your project-building needs. If you have any additional questions please contact our Support Team at technicalsupport@kregtool.com.
Will the Bench Clamp’s non-marring clamp pad work on the Face Clamps?: Due to different head styles, the non-marring pad that comes with your Bench Clamp™ will not work with our Face Clamp™ family. Non-marring pads are usually unnecessary when using our Face Clamps™, as they are generally not used to apply the same amount of clamping pressure as our Bench Clamps™ are.