Overall rating: 4.4385967 / 5 from 57 reviews.

AI Generated Review Summary

The Precision Router Table Fence is praised for its ease of use, durability, and effective dust collection. Customers have mixed feelings about its design and quality, but the customer service is highly recommended.

Summary topics

• Fence Usability (39%): A substantial number of customers appreciated the ease of use and durability of this fence for router tables.
• Dust Collection Effectiveness (7%): Customers raved about the dust collection port, stating that it works well and is better compared to the older fence.
• Customer Service Quality (12%): It was reported by customers that the customer service for this product is consistently great and highly recommended.

Review topics: ["instructions","fit","quality","works","design","customer service","assembly","fence","dust collection","table","addition","lift","lock"].

Review highlights

• "I wanted a good quality fence that included micro-adjustments." — Pete M.
• "The design and quality of the router table and fence are excellent." — Tom P.
• "I am impressed with the design and quality of the fence." — George W.

Reviews

Q&A

Is this fence compatible with the rockler pro max cast iron router table top?

We do not have a fence for that Top.

Will this fence work with a sawstop as an alternative to the SawStop RT-F27 27" Fence Assembly For RT?

No it will not fit.

i have a home made router table with t tracks that are the mounting for the current fence. am I correct that this fence has its own attachment independent of those tracks? and, what is the minimum table size?

Yes, this will have a rail on the right side that will need to be attached to the bottom side of the edge for the clamping block to slide on. The smallest width of top will be 32" as the keyhole slot will need to be 30-3/4" from the rights side.

I see reference to jointing capabilities with the fence, but cannot find any details on the site or web as to how that works. Can you point me to documentation, demo videos, etc.?

Remove the jointing rods stored in the fence extrusion. Loosen the outfeed fence face knobs. There are two shallow and two deep round channels in the fence extrusion behind the fence faces. For a 1/16″ offset, slide the rods into the shallow recesses. For a 1/32″ offset, slide the rods into the deep recesses. With the rods in place, tighten the outfeed fence face knobs.

Will this fit on my router table; Ryobi Universal Router Table-A25RT03. Thank you.

No, that will not work with that table.

is the T slot on the fence 1/4"?

Yes, that is 1/4" t-slot.

I bought this Kreg Router fence 4 years ago. The blue right side paddle clamp, does not apply clamping pressure. It simply flips down and applies no pressure. I unfortunately have "C Clamped" it to hold position, I'm embarrassed to say I do this. It's that bad. What do you suggest? Can it be replaced with new clamp?

Sounds like you are missing the nylon glides in your unit. Please give our Tech Team a call at 800-447-8638 M-F 8-5 CST or email them at technicalsupport@kregtool.com so they can help you out.

I have this router fence. The blue cam lock no longer locks the fence in position. Is there a fix for this or troubleshooting recommendation?

To get parts, please reach out to our Tech Support Team at 800-447-8638 M-F 8-5 CST or by technicalsupport@kregtool.com.

Will this work on prs2100?

No, the Benchtop is smaller than the full size router table.

What is the size of the dust port for my Kreg Precision Router Fence, need to purchase adapter to dust extractor hose.

That size is 2-1/2".