GREAT
"GREAT"
Overall rating: 4.909091 / 5 from 22 reviews.
AI Generated Review Summary
Summary topics
Review topics: [fit, feel, table, addition].
Review highlights
Reviews
I like this table very
"I like this table very much. It is very stable, and the only issue I’ve encountered involves my JessEm router lift — the mounting screws are just slightly off. I understand that adapters are available to lock it down properly, but I haven’t been able to locate them yet. That said, the fit is very snug, and I haven’t experienced any problems because the workpiece itself helps hold everything in place during use. Previously, I owned a Bosch RA1141 Portable Benchtop Router Table, which had a very poor router holding mechanism that relied on a small pin. While using it, the router came loose, and I was fortunate not to be injured. That experience made me much more aware of the importance of solid construction and secure mounting. I did transfer a few useful components from the Bosch table to this one. I moved the start/stop switch over, since the design allows for that option, and I also reused the accessory trays. Overall, the Kreg table is sturdier and better built. The all-metal frame and solid tabletop make it feel much more dependable and confidence-inspiring during operation. Based on my experience, I would recommend it."
Excellent product. . . high quality
"Excellent product. . . high quality"
Great addition to the router table
"Great product highly recommend"
Works very well with fence
"Works very well with fence"
Pros: • Highly Repeatable Cuts:
"Pros: • Highly Repeatable Cuts: The stop locks firmly in place, letting you return to the same cut multiple times without guesswork. • Easy to Adjust: Quick-release lever makes sliding and repositioning smooth. • Clear Scale & Cursor: Works well with Kreg’s measuring tape system for precise fence positioning. • Durable Build: Solid aluminum body, doesn’t feel flimsy. Cons: • Fence Dependency: Precision is only as good as the flatness of your fence. If the fence is nicked (like in your case), the stop can’t perform at its best. • Size Limitation: Best for medium-to-large workpieces. Small stock can sometimes feel awkward against the stop. Bottom Line: The router table stop is a reliable, well-engineered accessory that does exactly what it’s supposed to — improve repeatability. For users doing production runs or needing precise duplication, it’s a big help. But its full value shows only if the rest of the router table system (fence + measuring tape) is properly aligned and defect-free."
Nicely engineered, good materials, good
"Nicely engineered, good materials, good instructions"
I am enjoying the use
"I am enjoying the use of the Kreg Router Table. I feel it was engineered real well. I liked the adjustments to level the router plate."
Great addition to my new
"Great addition to my new Kreg router table fence."
They are easy to set
"They are easy to set up and use"
Q&A
- I presently own the Kreg Benchtop router table and the Kreg Fence that was supplied with the Benchtop table. Will the Kreg Fence Stop PRS7850 work with this Benchtop router table? Thank you!
- Yes, that stop will work with the benchtop table.
- will this work with the precision miter gauge
- No, this will only work with the Router Table Fences.
- Will this work with a DeWalt router model 616
- The 616 will work with our Router Tables.
- Is there any Kreg Trak that this is compatible with besides the router fence?
- You could use the Mini Trak but you would need to get the setback from the edge of the fence face correct.
- How long is the arm and is it compatible to Kreg top track?
- The arm will work with a fence height up to 2-5/8". This will not work with the Top Trak as the width is different between the Router Fence and the Top Trak.
- Can this item be used with your top track? The fence on my crosscut sled is higher than your other stops support. If it can be used correctly on the top track what is the length of the arm so I can see if it will work with my fence height? Lastly does this lock into the track in sick a way that there is ZERO deflection?
- I am sorry to say, It will not work as the top track is too wide for the Stop to go down flat against the fence.
Precision Router Table Stop
Availability:
-
In Stock
$44.99
- Highlights
- Flips out of the way when not in use
- Low-profile, aluminum design
- Precision Lens Cursor for clear, accurate view
- Compatible with Kreg® Precision Router Table and Precision Benchtop Router Table
Show More
You Might Also Like
