Average Review (19):

Straight, accurate, splinter-free cuts made easy

  • Rip, cross cut, and make angled cuts up to 48" long in plywood, MDF, and panels
  • Simply align the Guide Track with your marks to make accurate cuts
  • Hold track in place without clamps thanks to anti-slip guide strips
  • Prevent splintering with anti-chip strips that support material during the cut
  • Begin cuts easily with a Starting Block that supports the saw and allows normal blade guard operation
  • Mount almost any circular saw—left or right blade—to the Universal Sled
  • Universal Sled is compatible with the Kreg Rip-Cut™
  • Take your saw to the material instead of having to take your material to the saw
  • See a video on how-to break down large panels with the Accu-Cut and the Rip-Cut


ITEM#: KMA2700

Add to Cart


Transform your circular saw into a high-performance, track-guided cutting system

Start projects right by making straight, accurate, splinter-free cuts with your circular saw and the Accu-Cut™ Circular Saw Guide Track System. It rips, crosscuts and makes angled cuts up to 48" long in plywood, MDF, and other large panels with super simple setup, precise accuracy, and amazing control.

The Accu-Cut guides your circular saw along an aluminum track that keeps the saw moving in a straight line easily. The Accu-Cut™ design makes it simple to set up by just aligning the track with your cut line. No clamps are required to hold the track in place thanks to dual guide strips. They feature an anti-slip coating to prevent slipping, and an anti-chip feature to prevent splintered cuts. Plus, the track makes it easy to make straight cuts on sheets that don't have a straight, flat edge.

Circular saws don’t have effective guides that keep them moving straight along a cut line. Plus, it can be difficult to see the blade’s cutting path. Together, these things make it challenging to keep a saw on your desired cut. Circular saws also often cause splintering of face veneers. The Accu-Cut™ solves these problems. The Accu-Cut™ is portable, too, so you can take your saw to the workpiece and cut with precision, rather than having to handle heavy sheets on a table saw. 

The Accu-Cut™ is easy and intuitive for a novice to use, but robust enough for professionals. Because it eliminates the need to keep the saw straight and manually guide the saw along a cut line, the Accu-Cut™ is ideal for less-experienced users. Accu-Cut™ also makes professionals faster and more productive because it makes a variety of cuts quickly and easily in the shop and on the job site.

Accu-Cut & Rip-Cut - Breaking down the difference

How-to break down large panels with the Accu-Cut™ and the Rip-Cut™

Using the Accu-Cut sled on the Rip-Cut

How to use the Accu-Cut™ Universal Sled with the Rip-Cut™


Guide Track

Aircraft-quality aluminum with dual anti-chip, anti-slip guide strips 

Saw Sled

Accepts left- and right-blade saws
Built-in indexing stop and precision cursor

Cut Length

Maximum 48" (1220mm)


(1) Universal Saw Sled, (2) 26.5" Aluminum Guide Tracks, (2) Track Connectors, (1) Starting Block, (1) Track Indicator Clip, detailed setup and usage instructions


Proposition 65

Manual North American Manual

Reviews for "Accu-Cut™"

Average Review:

Amazing Solution

This product is just an amazing solution. No longer will I be reaching for the scrap heap, hoping to grab a board I have planed and jointed, then clamping it to what I want to cut. Then measuring the plate to the blade on my circular saw while using my fingers to keep the safety guard up. Clamping again. Hoping I didn't forget that measurement. Now it is as easy as 1,2,3!


By Scott Anderson

October 5, 2018

Almost awesome

My only complaint is that the sled rocks on the track. Actually, it's bad enough where I returned my first one but found the second to be the same way. My saw appears to be square on it's base. First I added shims to compensate but ended up instead adding a plastic guide rail (underneath the sled) the height of the track. Essentially, it rides on the cut-away material. Not perfect, but a huge improvement. Don't get me wrong, I love Kreg products overall, so keep 'em coming. Oh, and ditto on a track-only package. Thanks guys!


By Ian Wells

September 6, 2018


There is no support for the saw to stay in the rail system. Can’t get a straight cut. All the professionals use Festool rail, Dewalt also has one. Has metal rail system the keeps saw stable for accurate cut.


By Tim Montfort

September 6, 2018

Could have got 4 or even 5 Stars, but...

I'm sort of a novice to intermediate woodworker. First, I've got BOTH the Rip-Cut AND the Accu-Cut. The Rip-Cut is older and has a slightly different sled for the saw. While both are very good, I prefer the newer one on the Accu-Cut and have a saw mounted to it permanently. I switch from the Rip to Accu-Cut using the same sled without any adjustment. I really like the Accu-Cut. Does everything I need and want it to do. Only thing keeping me from giving this 5 stars (You LISTENING, Kreg?) is not being able to purchase a set of the connecting pieces separately. I would buy another Accu-Cut tomorrow if I had the ability to put them all together and cut a 8' length of plywood. 'Till then..........3 Stars.


By Robert Morton

June 17, 2018

Need More

Need extension capability so that customers can cut a full sheet of plywood at an angle. I have the Accu-Rip which allows me to break down full sheets at 90 degrees only. But I have 2 repeating projects that require angles that the 48" Accu-Cut is too short for. Thanks


By Ben Reese

June 15, 2018

Read more reviews

Get Inspired